A PART OF MARELLI
AMC is a device with a serial interface for connection to a PC allowing rapid calibration of fundamental engine parameters controlled by the ECU. Easy to use by means of Sysma tools.
Switch Panel 5 has been designed for motorbike application to be handy for rider use and also easy to be installed on the handlebar.
The Amc 6 Enc slew box is a six potentiometer-like encoders device with a serial interface for connection to a PC allowing rapid calibration of fundamental engine parameters controlled by the ECU.
All potentiometer are Vision programmable. As default configuration, injection time and spark advance are adjusted with two large knobs allowing smooth and precise regulation, a big central one is reserved for additional regulations (e.g. turbo pressure), three little knobs are for injection phase of the high and low injection banks and additional function (AUX1), defined by the application software on specific requests.
The encoders have the advantage that user doesn’t need to “zero” the knob position from a point to the subsequent, allowing a faster engine mapping.
The Amc 6 Enc contains the current loop/RS 232 interface which connects the PC directly to the ECU and retransmits commands between the two.
Amc 6 Enc back panel holds a couple of DB9 connector, one of them must be connected to the PC (with the provided RS 232 cable) and, if used, the other must be connected direct to the ECU.
Usable as “dyno” in all applications
Up to 5 separated switches are available.
With proper software configuration of ECU it can be used for several purposes, as On/Off switch or +/- level selection of strategy settings.
All Motorbike racing series